Advantages:

•     IGAR PR systems are high quality, leak-proof, and do not leak
•     Injection needle with atraumatic sharpening
•     Sterile. Complete set. Ready to use

Characteristics:

•     The IGAR PR device (systems) consist of a 0.8x38mm (21Gx11/2) injection needle, a Luer connection, a latex connector, a long PVC tube, a plastic clip with a roller, a plastic cylinder with a strainer, a needle for penetrating the container.
•     Additionally, they are equipped with a metal air needle, which is used to get air into the container.
•     The working length is 1520 ± 30 mm.
•     The strainer provides a particle retention of more than 29 microns.
•     Special needle surface coating and triple needle sharpening for painless injection.
•     Transparency of the material allows you to monitor the level of liquid and the sequence of dripping.
•     The air line consists of a needle and an air valve with a hydrophobic membrane that does not allow bacteria to pass through.
•     Sterilization: by ethylene oxide.

Application:

Attention!
- Set the infusion rate with the clamp.
- Additional medications should be administered only through the injection port.
- Do not empty the device when replacing the container.
Do not use the IGAR PR device if the packaging is damaged and/or after contact with a non-sterile surface. Opened packaging, used or unused medical device must be disposed of in accordance with the requirements of national standards.

Shelf life: 5 years.

Certification:

    The medical device has been put into circulation and/or use on the territory of Ukraine in accordance with the requirements of the Technical Regulations.
    The labeling on the package is in Ukrainian and fully complies with the requirements of state standards and technical regulations.
    The quality management system in production meets the requirements of DSTU EN ISO 13485